Building Access Control Waist Height Turnstiles Automatic With
Introduce of sliding turnstile gates :
Integrating mechanism, electronics and micro-processor advanced
technologies.The wasit height turnstile is a improvement of
intelligent tripod turnstiles.Equip various card-reading machines
with hi-performance security protection to realize real-time
warning and clever LED counter display guide passers .it balance
pedestrian intelligent control and management.
sliding turnstile gates designs with tailored stainless steel make
its elegance-looking,durable and anti-oxidation .Considering unique
requests,we built-in standard electrical interface to best-fit
customer easier using magnetic card,barcode,ID&IC cards
integrated .This system provides civilized,well-organized pass
management and meantime its prohibit illegal persons entry&out
SPECIFICATIONS of waist height turnstile
|1||integration system||RFID system , face recognition system , ESD system|
|2||Frame material||304 stainless steel|
|3||Frame Size||(W)310x(L)1400x(H)1000mm or customized|
|5||Rotation direction||bi-directional and unidirectional|
|6||Controller||dapts micro-computer controller can be 7 programmed according to
|7||Interface:||standard input and output interfaces can be used for other
|8||Signal source||dry contact and high-low level signals|
|9||Working voltage||220V AC ±10%|
|10||Voltage:||220V AC ±10%, 24V DC at 3A ±10% and 12VDC at 3A ±10%|
|11||Indoor/outdoor temperatures||-10to 70°C|
|14||Traffic speed||30~35 persons/minute|
|15||Fault status||power-off and giving free exit/entry path|
|16||Movement failure rate||More than 5millions|
|18||Card reader area||2|
Functions and Features of the sliding gates :
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one
direction card reading and another no reading; one direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the flap barrier
and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control
8. Anti-rush function: if there is no open single, arm will be
9. Double anti-clipping function: photocell anti-clipping and
mechanical anti-clipping.When passenger is going through the flap
barrier, photocell will detect out this situation and will not
close. After passenger passed, arm will close automatically. During
its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
Also it will alarm.
10. Flap barrier is with standard electrical interface for the
integration of various readers and writers.
11. Flap barrier can count how many passenger has passed and will
show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control
15. Stable running with little noise.